Statek公司自豪地宣布发布其30kRad耐受、超高冲击、低相位噪声振荡器。CXOXLPNR能够承受高达100000g的冲击，封装在3.2x2.5mm贴片晶振的密封陶瓷封装中，工作温度范围为-55°C至+125°C。CXOXLPNR提供低电压CMOS输出，具有低相位噪声、低抖动和低加速度灵敏度。在125MHz时，其本底噪声在20MHz偏移处为-165 dBc/Hz，在12kHz至20MHz范围内的典型RMS相位抖动为75fs。CXOXLPNR石英晶振具有满足所有项目要求的筛选选项，将成为所有近地轨道（LEO）应用的首选。

Statek的超小型低地球轨道（LEO）适用振荡器具有高冲击和30kRad生存能力。这些石英晶体振荡器提供具有超低相位噪声、抖动和加速度灵敏度的低电压CMOS输出。在50MHz下，从12kHz到20MHz的典型RMS相位抖动仅为150fs。

CXOXLPNR产品特征：

●30kRad（Si）总电离剂量

●高抗震性，三点安装*100000 g可选

●3.2x2.5毫米微型包装，提供其他包装选项

●带启用/禁用功能的CMOS输出石英晶振

●低相位噪声和抖动

●可进行全面军事测试

●加速度灵敏度低

●宽电源电压选项（1.8V至3.3V）

●无PLL伪影

●密封陶瓷包装

●在美国设计和制造

应用程序：太空与航空航天，小型卫星，命令和数据处理（C&DH），通讯，航行，全球定位系统

Statek斯塔克晶振公司位于加利福尼亚州奥兰治市，是美国领先的高可靠性晶体和振荡器的设计师和制造商。Statek的核心能力是能够使用其专利光刻和化学研磨工艺在石英晶片中设计和制造超小型谐振器。Statek成立于1970年，已成为所有需要高可靠性和极其稳健性能的行业的高冲击和高振动晶体和振荡器的首要供应商。Statek具有卓越的冲击和振动、扩展的温度范围、体积小和极高的可靠性，是工业、军事、医疗和航天行业的首选供应商。

Statek的CXOXLPNR具有高冲击和30kRad生存能力
Statek Corporation is proud to announce the release of its 30 kRad tolerant, ultra-high shock, low phase-noise oscillator. Capable of withstanding shocks up to 100,000 g, the CXOXLPNR is housed in a hermetically sealed ceramic 3.2 x 2.5 mm package and has an operating temperature range of -55 °C to +125 °C. The CXOXLPNR delivers a low voltage CMOS output with low phase noise, low jitter and low acceleration sensitivity. At 125 MHz, its noise floor is -165 dBc/Hz at 20 MHz offset and the typical RMS phase jitter over 12 kHz to 20 MHz is 75 fs. Available with screening options to meet all program requirements, the CXOXLPNR will become the preferred choice for all Low Earth Orbit (LEO) applications.
Located in Orange, California, Statek Corporation is the leading U.S. designer and manufacturer of high reliability crystals and oscillators. Statek’s core competency is its ability to design and manufacture ultra-miniature resonators in quartz wafers using its patented photolithographic and chemical milling processes. Founded in 1970, Statek has become the premier supplier of high shock and high vibration crystals and oscillators for all industries requiring high reliability and extremely robust performance. With superior shock and vibration, extended temperature ranges, small size and extreme high reliability, Statek is the supplier of choice for the Industrial, Military, Medical, and Space industries.

OSCILLATOR MODEL	PACKAGE (mm)	FREQUENCY RANGE (Click for Data Sheet)
CXOU Ultra-Low Power	2.0 x 1.2	32 kHz to 100 kHz
CXOL Ultra-Low Power	3.2 x 1.5	32 kHz to 100 kHz
CXOLAT	3.2 x 1.5	32.768 kHz
CXOLHG High Shock	3.2 x 1.5	16kHz to 32.768 kHz
CXOLHT Performance to 200°C Shock to 100,000g	3.2 x 1.5	16 kHz to 50 MHz
CXOLP Low Power	3.2 x 1.5	1 MHz to 8.5 MHz
CXOQ, CXOQHG High Shock	2.5 x 2.0	16 kHz to 100 MHz
STXO, STXOHG Tight Frequency Stability Shock to 100,000g	3.2 x 2.5	10 MHz to 70 MHz
CXOX, CXOXHG High Shock	3.2 x 2.5	16 kHz to 160 MHz
CXOXHT High Temperature	3.2 x 2.5	32.768 kHz 1 MHz to 50 MHz
CXOXULP Ultra-Low Power	3.2 x 2.5	32.768 kHz
CXOXULPHT High Temperature Ultra Low Power	3.2 x 2.5	32.768 kHz
CXOXLPN Low Phase Noise High Shock	3.2 x 2.5	10 MHz to 125 MHz
CXOXLPNR Radiation Tolerant	3.2 x 2.5	20 MHz to 125 MHz
MTXO, MTXOHG Tight Frequency Stability (±5ppm) High Shock	3.2 x 2.5	10 MHz to 50 MHz
CXOMK, CXOMKHG High Shock	6.5 x 5.0	32.768 kHz 200 kHz to 200 MHz
CXOMKHT High Temperature	6.5 x 5.0	32.768 kHz 200 kHz to 50 MHz
LVDS	3.2 x 5.0 7.0 x 5.0	10 MHz to 160 MHz
ETXO High Frequency	7.5 x 5.0	20 MHz to 125 MHz
HTXO High Temperature	7.5 x 5.0	32.768 kHz 1.5 MHz to 50 MHz
HGXO High Shock	7.5 x 5.0	32.768 kHz to 50 MHz
HGXOHT High Shock High Temperature	7.5 x 5.0	32.768 kHz 460 kHz to 50 MHz